Film Capacitors – Made in Germany

SMD capacitors

WIMA SMD capacitors in size codes 1812, 2220, 2824, 4030, 5040 and 6054, capacitance values from 0.01 µF through 6.8 µF and voltage ranges from 63 VDC through 1000 VDC cover nearly the entire application range of conventional through hole plastic film capacitors. All WIMA SMD series are produced with the proven box technology, showing the following advantages in comparison with non-encapsulated or moulded SMD capacitor versions:

  • Safe protection of the capacitor element against mechanical and thermal stresses during processing and operation.
  • No danger of internal cracks or tearing away of the contacts due to construction elasticity.
  • No danger of delamination due to solder plates over the capacitor's entire end surfaces.
  • Flame-retardant plastic case in accordance with UL 94 V-0.
These features and the wide capacitance range enable WIMA SMDs to substitute other capacitor technologies and become standard components in electronic developments.

SMD capacitors
metallized
SMD-PET
SMD-PEN
SMD-PPS
Dielectric Polyester (PET) film Polyethylene- naphthalate (PEN) film Polyphenylene- sulphide (PPS) film
Test category in accordance with IEC 55/100/21 55/125/21 55/140/56
Temperature range -55°C to +125°C -55°C to +125°C -55°C to +140°C
Dissipat. factor tan δ at 1 kHz and +20°C < 8 x 10-3
>1.0 µF: < 10 x 10-3
< 8 x 10-3 < 15 x 10-4
>0.1 µF: < 20 x 10-4
Insulation resistance at +20°C*
3.75 x 103
>0.33µF: >1250sec
>3.75 x 103
>0.33µF: >1250sec
>1 x 104
>0.33µF: >3000sec
Voltage ranges VDC Capacitances 63 100 250 400 630 1000 63 100 250 400 63 100 250 400 630 1000
0.01 µF 1812 2220 2824 4030 5040 6054 1812 2220 2824 4030 5040 6054 1812 2220 2824 4030 5040 6054 2824 4030 5040 6054 4030 5040 6054 1812 2220 2824 1812 2220 2824 2220 2824 2824 1812 2220 2824 4030 5040 6054 1812 2220 2824 4030 5040 6054 2220 2824 4030 5040 6054 5040 6054 5040 6054
0.015 µF 5040 6054
0.022 µF 4030 5040 6054
0.033 µF
0.047 µF
0.068 µF
0.1 µF
0.15 µF
0.22 µF
0.33 µF
0.47 µF
0.68 µF
1.0 µF
1.5 µF
2.2 µF
3.3 µF
4.7 µF
6.8 µF
Capacitance tolerances ±20%, ±10%, (±5%*) ±20%, ±10%, (±5%*) ±20%, ±10%, (±5%*)
SMD-PET
SMD-PEN
SMD-PPS
* The insulation resistance data refers to the lowest rated voltage of each range.
* Available subject to special enquiry.